In the industrial sector, steel shot, as a commonly used metal abrasive, is characterized by its hardness and density, which are two key indicators for assessing its performance. This article delves into how these two parameters affect the performance and application effects of steel shot.

  The Influence of Hardness on Steel Shot

  Hardness directly reflects the abrasive effect of steel shot on the surface of the treated material.According to the analysis by Mali Steel Shot Technology Co., Ltd.,the hardness of steel grit typically ranges between 40~65HRC.This hardness range enables steel shot to effectively remove impurities and oxide scale from metal surfaces while maintaining its own wear resistance.Steel shot with higher hardness is more rapid and efficient in surface treatment but may also cause excessive wear on the treated surface.Therefore, when selecting steel shot, it is necessary to consider the hardness based on the material and surface requirements of the treated object.

  The Influence of Density on Steel Shot

  Density is another important physical property of steel shot, directly impacting its strength and compressive resistance. The density of steel grit generally lies between 7.2~7.8g/cm³, significantly higher than that of typical abrasive materials.High-density steel shot provides greater impact force and higher shear force during surface treatment,resulting in more desirable surface treatment effects. However, excessively dense steel shot may lead to increased equipment wear and energy consumption.

  According to data from Mali Steel Shot Technology Co., Ltd., the density of steel shot is usually above 7.0g/cm³, while the hardness varies depending on the type of steel shot. For example,GP steel grit has a hardness of 40-51HRC, GL steel grit has a hardness of 54-61HRC,and GH steel grit has a hardness greater than 60HRC. These data indicate that the hardness and density of steel shot are precisely controlled to meet the needs of different industrial applications.

  A reasonable combination of hardness and density is crucial for ensuring the performance of steel shot.High-hardness steel shot is suitable for surface treatment of materials with higher hardness.Similarly, high-density steel shot is applicable to processes requiring deep cleaning and high strength , while 

low-density steel shot is suitable for situations where equipment wear and energy consumption are limited.

  In conclusion, the hardness and density of steel shot are two key factors that influence its performance in industrial applications. Selecting the appropriate steel shot requires comprehensive consideration of  both hardness and density parameters based on the nature of the treated material and process requirements. By precisely controlling these two parameters, the work efficiency and service life of steel shot can be  improved, while reducing equipment wear and energy consumption.

Your Most Thoughtful Expert in Anti-corrosion and Rust Removal!

Consultation Hotline: 400-038-8928

Telephone: 027-84841595

Steel Shot Sister Hotline: 13016427928

Official Website:www.malgw.com